.jpg)
Wearing a dress dyed navy & stitched
(Dyed with Dylon Machine Dye)
Perhaps try a different approach...
Dress stitched to cover marks
Dress & stitching then dyed navy
If you don't like the colour but the item is otherwise great - think about dyeing it. There are a number of important things to bear in mind here. Firstly, think of colour mixing rules. If the garment is red and you dye it blue it will end up purple. If it's yellow to start with, it will turn a shade of green and so on. If the fabric is patterned you will probably still be able to see the pattern after you dye the garment...
.jpg) |
| Check pattern is still visible when overdyed with navy |
If it has top stitching, this may not dye as the thread is often synthetic. Will the colour you are dyeing the garment look good if the topstitching stays the undyed colour? Also, it is quite hard to get a true black. Garments dyed black will often come out a dark grey. Will you mind?
And very importantly, are you using the right dye? Cotton, linen and viscose turn out very well when dyed in the washing machine with Dylon machine dyes and you don't need to add anything else. It won't cover bleach, and stains and faded areas may still remain. You can dye the above fabrics and silk, ramie, wool and cashmere using RIT All-Purpose dye which is an alternative dye product. If you are dyeing synthetic garments you would need Rit DyeMore for Synthetic Fibres. Dyeing a garment, or even better several at a time, has a number of more sustainable advantages over buying new ones through waste reduction, increasing garment longevity and reduced environmental impact and water use.
.jpg)
Two tops dyed black (dark grey result) & shortened
I have used Dylon in the machine many times very successfully. Usually I save up a few things that I want a particular colour so that I get the best use out of a dye pod. I have dyed trousers, tops and dresses which I have gone on to wear much more than if I'd left them the colour they were. You can use RIT in the machine too but it's more of a palaver than Dylon. I have used RIT very successfully in a tub to dye wool and cashmere and been pleased with the outcome.
.jpg)
Cashmere cardi dyed from bright orange to khaki using RIT All Purpose Dye
It may not be the colour of a garment that's the problem, it may be something to do with the fit. I often find things are too long as I'm quite short and have successfully shortened several tops and trousers so they are a length I am more comfortable with. I have even done this with jumpers where I have cut off the bottom, picked up the stitches and knitted a new edging at a better length. This is more complicated than just stitching something up but if you are a knitter or know one who could help, this might be an option for you...
.jpg)
Jumper - Bottom and sleeves cut off & re-knitted to be shorter
Maybe it's something cosmetic about a garment. Perhaps you just don't like the buttons. These can easily be changed. In fact you might already have some suitable buttons in your button tin, or might find some in your local charity shop or haberdashers.
Shirt dyed from cream to black (dark grey result) with Dylon. Original plastic buttons replaced by mother of pearl buttons from my stash
Finally it might be that a mend that is needed. Your garments might have a hole or be wearing thin. This too can be easily remedied with a patch, a darn or some reinforcing stitching. Or perhaps you need to cover up a stain, or some marks which you could again do with some decorative stitching or add some patches. You might want to consider whether you want to go down the route of visible mending or the more traditional route.
.jpg)
Stitching on trousers backed on the inside with fabric where trouser fabric is wearing thin
Apron with patches & stitching, Boro style, to cover a stitched design I didn't like
If things are a little big you might be able to take them in or use one of the alteration services that many towns and cities have.
